Indeed, air conditioners are appliances that have become household items when installed in homes, mainly in hot and humid climates. Unfortunately, they are affected by short cycling, which affects both their efficiency and life. This is when the air conditioner continuously switches on and off without achieving any full cooling cycle. However, it is dysfunctional in terms of increasing electricity consumption as well as damaging the entire system. Steam cleaning perfectly puts the indoor air conditioner in a good position against all dirt, mold, and bacteria within the interiors of the system. Visit https://www.lsairconservicing.sg/blog/ to learn about different air conditioner issues.
Short Cycling of Air Conditioner
The short cycle is the term used to describe a situation whereby the air conditioning system repeatedly turns on and off in a very short time and does not ever complete a full cooling cycle. When an AC normally has to work, it would run until the desired temperature is reached indoors before switching off for an appropriate period, after which it would have to switch back on. For short cycling, however, this would frequently switch on and off, sometimes with repeated cycles of as little as a few minutes.
Steam Cleansing Process in Air Conditioning
The procedure of steam cleaning is used on a more regular basis for the maintenance of air conditioners to avoid internal mechanical failures like short cycling from occurring. Visit https://www.lsairconservicing.sg/ to hire trained professionals for steam cleaning. The process of steam cleaning consists of the following steps:
Step 1: Preparation
The first step is switching off the system and unplugging it so that the technician and client may experience freedom from electric shock or injury while performing the entire process of cleaning or repairs. Removing the cover at the same time as the filters for cleaning and taking out the internal parts completes the process.
Step 2: Cleaning the Filters
Dust and pollen gradually build up in the air filters. It will eventually block the flow of air and cause short cycling. Filters can either be washed in water or changed when they seem too dirty or damaged.
Step 3: Steam Cleaning the Evaporator Coils
These evaporator coils serve the purpose of cooling; however, dirt, molds, and bacteria accumulated in these coils and were rendered ineffective. An effective steam cleaner throws high-pressure steam onto that evaporator coil, which then breaks it down and sanitizes the surface from stubborn spare dirt.
Step 4: Steam Wash of the Condenser Coils
Another important aspect is that the condenser coils are also part of the outdoor unit and will also be cleaned this time since heat is released outside due to the condenser coils. Steam cleaning on these coils will improve the efficiency of heat carried from the indoor unit to the outdoor unit, thereby relieving the stress on the system.
Step 5: Clean the Drain Pan and Drain Line
Airflow is reduced due to the accumulation of water at a point, making way for leakage and promoting mold to grow further. Using steam, clogs inside the drain pan and the drain line open up quite quickly.
Step 6: Final Inspection and Drying
Final assembly occurs after steam cleaning, and the unit is allowed to completely evaporate before reassembly. A last check is conducted to ensure that all components are clean and in good working order before the AC is turned on again.
Conclusion
The most prevalent problem is short cycling, which tends to adversely affect the efficiency or life of air conditioners. Regular maintenance translates to the most efficient running of your ACs. This may include steam cleaning. Steam cleaning can remove dirt, bacteria and mold from filters, coils and drain lines. Knowledge about short-cycling causes and cleaning methods will significantly improve energy-efficiency ratings.